PUFFCO PROXY INSTRUCTION MANUAL Pdf Download (2024)

FAQs

Can you use 91 isopropyl alcohol to clean Puffco? ›

The sticky nature of concentrates can make them prone to messiness, but regular cleaning prevents the build-up of harmful bacteria and enhances your overall vaping experience. Glass, quartz, and ceramic exposed surfaces can be cleaned with 91%+ isopropyl alcohol and a cotton swab.

You cannot use the Puffco Proxy while it's charging for safety reasons. Waiting for the device to fully charge ensures optimal performance. Using the device while charging may lead to accidents or damage. Charging the Puffco Proxy before use guarantees uninterrupted vaping sessions.

Puffco recommends 99% Isopropyl Alcohol because lower percentages have a higher water content which “could potentially cause issues”.

If you find only 91% isopropyl alcohol available buy it and dilute it to 70%, because the 30% water makes it more effective at killing virus. The simple way to do this is to add 0.3 part water (three tenths) to one part 91% alcohol.

When the device is in its active heat cycle mode, double click the button to enable boost mode. Boost mode will change the lights to a rainbow colour, and it will both extend the time and increase the temperature of your heat cycle.

Purchasers should note that atomizers are replaceable parts with an expected life of 1 – 3 months, depending on usage, and they require regular cleaning to maintain functionality.

The Puffco Proxy has 4 temperatures that you can select from. This ranges from the lowest temperature - blue, to the highest temperature - white.

After heating up, double click to activate boost mode. This extends the time and increases the temperature of your hit.

The rainbow light is an indication that there is a connection issue between the base and atomizer & does not necessarily mean that anything is broken or defective. The first tip is to remove the atomizer, clean the connection pins with a cotton swab dipped in iso, and reattach the atomizer.

Contrary to popular belief, lithium-ion batteries prefer shallow charge cycles. This means charging from, for example, 20% to 80%, instead of a complete 0% to 100% cycle. By adopting this partial charging approach, you can reduce stress on the battery and prolong its overall lifespan.

Can you use 91 isopropyl alcohol to clean dab rig? ›

You'll want coarse salt, 91-99% isopropyl alcohol, a ziplock bag, and some cotton swabs or pipe cleaners for hard-to-reach areas. First, place your banger into the plastic bag and add just enough isopropyl alcohol to almost cover it. From there, add some coarse salt and seal it up.

Even though you may think the higher concentration is more effective, experts say 70% is actually better for disinfecting. It has more water, which helps it to dissolve more slowly, penetrate cells, and kill bacteria. The disinfecting power of rubbing alcohol drops at concentrations higher than 80%-85%.

Isopropyl alcohol (rubbing alcohol) is an acceptable cooking fuel. It may be purchased in 70 percent, 91 percent. The higher the percentage of alcohol, the better the alcohol will burn. Isopropyl alcohol produces a yellow flame and does not burn as cleanly denatured alcohol or ethanol.

Isopropyl alcohol removes oils, adhesives, fingerprints, soldering flux and other contaminants, making it ideal for cleaning electronics. However, it is important to note that only alcohol with a grade of 90% or more should be employed on circuit boards and other internal electronics.